calculatetable

Occurrence

optional, single

Attributes

Description

Inside <calculatetable> statements concerning a decompression table to be calculated are given.

The <calculatetable> element stands inside the <tablegeneration> section and can be repeated any times. The only elements with same hierarchy level inside <tablegeneration> are <calculateprofile>, and <calculatebottomtimetable> respectively. If used more than once, these elements should not be mixed. (Here <calculatebottomtimetable> has to be given after <calculatetable>.)

The only element within <calculatetable> is <table> which can be repeated any times.

Parent Elements

<tablegeneration>

Child Elements

<table>

See Also

<calculatebottomtimetable>, <calculateprofile>, <tablegeneration>

Examples

<uddf version="3.1.0">
    <!-- the <generator> section has to appear in every UDDF file -->
    <generator>
        <!-- description of the program generating the UDDF file -->
        <name>DSTG - Diver's Super Table Generator</name>
        <manufacturer>Dive Heroes Company</manufacturer>
        <manufacturer>
            <name>Dive Heroes Company</name>
            <address>
                <!-- address data of manufacturer -->
            </address>
            <contact>
                <!-- contact data of manufacturer -->
            </contact>
        </manufacturer>
        <version>2.23607</version>
        <datetime>2007-09-20</datetime>
    </generator>
    <gasdefinitions>
        <mix id="air">
            <name>air</name>
            <o2>0.210</o2>
            <n2>0.790</n2>
            <he>0.000</he>
            <ar>0.000</ar>
            <h2>0.000</h2>
        </mix>
        <mix id="noaa1">
            <name>NOAA1</name>  <!-- 32 % O2, 68 % N2 -->
            <o2>0.320</o2>
            <n2>0.680</n2>
            <he>0.000</he>
            <ar>0.000</ar>
            <h2>0.000</h2>
        </mix>
        <!-- <tankdata> is omitted, because a breathing gas consumption -->
        <!-- calculation is not performed when generating a table -->
    </gasdefinitions>
    <profiledata>
        <repetitiongroup id="rg1">
            <dive id="dive1">
                <!-- here all dive profile data -->
            </dive>
            <!-- here can be stored more dive profiles -->
        </repetitiongroup>
        <!-- here all other recorded dive profiles -->
    </profiledata>
    <tablegeneration>
        <!-- in this case dive tables shall be generated -->
        <calculatetable>
            <!-- the first table shall be calculated for air as breathing gas, -->
            <!-- tissues are saturated concerning ambient pressure (here: sea level) -->
            <table id="table_air_no-prev-saturation_0m">
                <link ref="air"/>
                <surfaceintervalbeforedive>
                    <infinity/>
                </surfaceintervalbeforedive>
                <density>1030.0</density>
                <!-- statements for the output to be generated -->
                <output>
                    <!-- language: English -->
                    <lingo>en</lingo>
                    <!-- a HTML file shall be generated -->
                    <fileformat>html</fileformat>
                    <!-- the name of the output file (the extension ".html" MUST NOT be given) -->
                    <filename>table_air_no-prev-saturation_0m</filename>
                    <!-- a headline for the table -->
                    <headline>Table for air, no previous saturation, sea level</headline>
                    <!-- additional remarks, to be inserted as text into the output file -->
                    <remark>Calculated on basis of the ZH-L16c deco model</remark>
                </output>
                <applicationdata>
                    <!-- here additional parameters for the executing software -->
                </applicationdata>
                <decomodel>ZH-L16c</decomodel>
                <!-- maximum ascent velocity 10 m/min ^= 0.1666... m/s -->
                <maximumascendingrate>0.16666666667</maximumascendingrate>
                <!-- the following parameters all MUST BE GIVEN -->
                <tablescope>
                    <!-- sea level -->
                    <altitude>0.0</altitude>
                    <!-- shallowest depth 9 m to begin with table output -->
                    <divedepthbegin>9.0</divedepthbegin>
                    <!-- deepest depth 65 m to end with table output -->
                    <divedepthend>65.0</divedepthend>
                    <!-- increment 3 m for table output -->
                    <divedepthstep>3.0</divedepthstep>
                    <!-- maximum bottom time to be considered for table output 30 minutes -->
                    <bottomtimemaximum>1800.0</bottomtimemaximum>
                    <!-- minimal bottom time to be considered for table output 5 minutes -->
                    <bottomtimeminimum>300.0</bottomtimeminimum>
                    <!-- at beginning (at shallowest depth) increment 25 minutes -->
                    <bottomtimestepbegin>1500.0</bottomtimestepbegin>
                    <!-- increment 1 minute at deepest depth -->
                    <bottomtimestepend>60.0</bottomtimestepend>
                </tablescope>
            </table>
            <!-- the second table shall be calculated for nitrox (NOAA1) as breathing gas, -->
            <!-- tissues are saturated concerning ambient pressure (here: sea level) -->
            <table id="table_noaa1_no-prev-saturation_0m">
                <link ref="noaa1"/>
                <surfaceintervalbeforedive>
                    <infinity/>
                </surfaceintervalbeforedive>
                <density>1030.0</density>
                <!-- statements for the output to be generated -->
                <output>
                    <!-- language: English -->
                    <lingo>en</lingo>
                    <!-- a HTML file shall be generated -->
                    <fileformat>html</fileformat>
                    <!-- the name of the output file (the extension ".html" MUST NOT be given) -->
                    <filename>table_noaa1_no-prev-saturation_0m</filename>
                    <!-- a headline for the table -->
                    <headline>Table for nitrox NOAA1, no previous saturation, sea level</headline>
                    <!-- additional remarks, to be inserted as text into the output file -->
                    <remark>Calculated on basis of the ZH-L16c deco model</remark>
                </output>
                <applicationdata>
                    <!-- here additional parameters for the executing software -->
                </applicationdata>
                <decomodel>ZH-L16c</decomodel>
                <!-- maximum ascent velocity 10 m/min ^= 0.1666... m/s -->
                <maximumascendingrate>0.16666666667</maximumascendingrate>
                <!-- the following parameters all MUST BE GIVEN -->
                <tablescope>
                    <!-- sea level -->
                    <altitude>0.0</altitude>
                    <!-- shallowest depth 9 m to begin with table output -->
                    <divedepthbegin>9.0</divedepthbegin>
                    <!-- deepest depth 65 m to end with table output -->
                    <divedepthend>65.0</divedepthend>
                    <!-- increment 3 m for table output -->
                    <divedepthstep>3.0</divedepthstep>
                    <!-- maximum bottom time to be considered for table output 30 minutes -->
                    <bottomtimemaximum>1800.0</bottomtimemaximum>
                    <!-- minimal bottom time to be considered for table output 5 minutes -->
                    <bottomtimeminimum>300.0</bottomtimeminimum>
                    <!-- at beginning (at shallowest depth) increment 25 minutes -->
                    <bottomtimestepbegin>1500.0</bottomtimestepbegin>
                    <!-- increment 1 minute at deepest depth -->
                    <bottomtimestepend>60.0</bottomtimestepend>
                </tablescope>
            </table>
            <!-- the third table again shall be calculated for air as breathing gas, but now -->
            <!-- tissues are saturated on basis of a previously made dive -->
            <table id="table_air_with-prev-saturation_0m">
                <link ref="air"/>
                <link ref="dive1"/>
                <!-- a surface interval of two hours shall be taken into account between -->
                <!-- the previous dive (cross-referenced above) and the next one for -->
                <!-- which the table is to be calculated -->
                <surfaceintervalbeforedive>
                    <passedtime>7200.0</passedtime>
                </surfaceintervalbeforedive>
                <density>1030.0</density>
                <!-- statements for the output to be generated -->
                <output>
                    <!-- language: English -->
                    <lingo>en</lingo>
                    <!-- a HTML file shall be generated -->
                    <fileformat>html</fileformat>
                    <!-- the name of the output file (the extension ".html" MUST NOT be given) -->
                    <filename>table_air_with-prev-saturation_0m</filename>
                    <!-- a headline for the table -->
                    <headline>Table for air, with previous saturation, sea level</headline>
                    <!-- additional remarks, to be inserted as text into the output file -->
                    <remark>
                        Calculated on basis of the ZH-L16c deco model; for comparison purposes with
                        a dive ended two hours before
                    </remark>
                </output>
                <applicationdata>
                    <!-- here additional parameters for the executing software -->
                </applicationdata>
                <decomodel>ZH-L16c</decomodel>
                <!-- maximum ascent velocity 10 m/min ^= 0.1666... m/s -->
                <maximumascendingrate>0.16666666667</maximumascendingrate>
                <!-- the following parameters all MUST BE GIVEN -->
                <tablescope>
                    <!-- sea level -->
                    <altitude>0.0</altitude>
                    <!-- shallowest depth 9 m to begin with table output -->
                    <divedepthbegin>9.0</divedepthbegin>
                    <!-- deepest depth 65 m to end with table output -->
                    <divedepthend>65.0</divedepthend>
                    <!-- increment 3 m for table output -->
                    <divedepthstep>3.0</divedepthstep>
                    <!-- maximum bottom time to be considered for table output 30 minutes -->
                    <bottomtimemaximum>1800.0</bottomtimemaximum>
                    <!-- minimal bottom time to be considered for table output 5 minutes -->
                    <bottomtimeminimum>300.0</bottomtimeminimum>
                    <!-- at beginning (at shallowest depth) increment 25 minutes -->
                    <bottomtimestepbegin>1500.0</bottomtimestepbegin>
                    <!-- increment 1 minute at deepest depth -->
                    <bottomtimestepend>60.0</bottomtimestepend>
                </tablescope>
            </table>
            <!-- the fourth table shall be calculated for nitrox (NOAA1) as breathing gas, and -->
            <!-- tissues are saturated on basis of a previously made dive -->
            <table id="table_noaa1_with-prev-saturation_0m">
                <link ref="noaa1"/>
                <link ref="dive1"/>
                <!-- a surface interval of two hours shall be taken into account between -->
                <!-- the previous dive (cross-referenced above) and the next one for -->
                <!-- which the table is to be calculated -->
                <surfaceintervalbeforedive>
                    <passedtime>7200.0</passedtime>
                </surfaceintervalbeforedive>
                <density>1030.0</density>
                <!-- statements for the output to be generated -->
                <output>
                    <!-- language: English -->
                    <lingo>en</lingo>
                    <!-- a HTML file shall be generated -->
                    <fileformat>html</fileformat>
                    <!-- the name of the output file (the extension ".html" MUST NOT be given) -->
                    <filename>table_noaa1_with-prev-saturation_0m</filename>
                    <!-- a headline for the table -->
                    <headline>Table for nitrox NOAA1, with previous saturation, sea level</headline>
                    <!-- additional remarks, to be inserted as text into the output file -->
                    <remark>
                        Calculated on basis of the ZH-L16c deco model; for comparison purposes with
                        a dive ended two hours before
                    </remark>
                </output>
                <applicationdata>
                    <!-- here additional parameters for the executing software -->
                </applicationdata>
                <decomodel>ZH-L16c</decomodel>
                <!-- maximum ascent velocity 10 m/min ^= 0.1666... m/s -->
                <maximumascendingrate>0.16666666667</maximumascendingrate>
                <!-- the following parameters all MUST BE GIVEN -->
                <tablescope>
                    <!-- sea level -->
                    <altitude>0.0</altitude>
                    <!-- shallowest depth 9 m to begin with table output -->
                    <divedepthbegin>9.0</divedepthbegin>
                    <!-- deepest depth 65 m to end with table output -->
                    <divedepthend>65.0</divedepthend>
                    <!-- increment 3 m for table output -->
                    <divedepthstep>3.0</divedepthstep>
                    <!-- maximum bottom time to be considered for table output 30 minutes -->
                    <bottomtimemaximum>1800.0</bottomtimemaximum>
                    <!-- minimal bottom time to be considered for table output 5 minutes -->
                    <bottomtimeminimum>300.0</bottomtimeminimum>
                    <!-- at beginning (at shallowest depth) increment 25 minutes -->
                    <bottomtimestepbegin>1500.0</bottomtimestepbegin>
                    <!-- increment 1 minute at deepest depth -->
                    <bottomtimestepend>60.0</bottomtimestepend>
                </tablescope>
            </table>
        </calculatetable>
    </tablegeneration>
</uddf>